In stock. Defi DF Blue Racer N2 Boost Gauge
Racedom is proud to supply the car enthusiast with a large selection of Defi Gauges. Introducing the new Defi Racer N2 Gauges, these are a very quick responding and highly accurate analog gauges. Additionally, these gauges are standalone, and a control unit is not necessary.
In stock. Defi DF Blue Racer N2 Boost Gauge
Main specification
- Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm)
- Standalone/control unit NOT necessary/non-link system
- Self-diagnosis function of disconnected/short-circuit
- Swtich and indicator is attached to 3 1/8″(80mm) tachometer
- Illumination color: global model -> white, USDM models -> red
- In-house production stepping motor provides smooth operation.
- Commercial attachment necessary
- Illumination ON/OFF: interlocked with vehicle illumination switch
- Opening/ending modes
- Mounting bracket attached
- Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)
Lineup
| SI models (Blue) | 52mm | 60mm | 80mm | Display range |
| TURBO 2.0 | DF16001 | DF16601 | – | -100kPa to +200kPa |
| TURBO 3.0 | DF16101 | DF16701 | – | -100kPa to +300kPa |
| PRESS. | DF16201 | DF16801 | – | 0 to 1000kPa |
| TEMP. | DF16301 | DF16901 | – | 30 to 150℃ |
| E.G.T. | DF16401 | DF17001 | – | 200 to 1100℃ |
| VOLT | DF16501 | DF17101 | – | 10 to 15V |
| Tachometer 9000rpm | – | – | DF17201 | 0 to 9000rpm |
| Tachometer 11000rpm | – | – | DF17301 | 0 to 11000rpm |
| USDM models (Red) | 2 1/16″(52mm) | 2 3/8″(60mm) | 3 1/8″(80mm) | Display range |
| BOOST 30PSI | DF16002 | – | – | -30inHg to +30PSI |
| BOOST 45PSI | DF16102 | – | – | -30inHg to +45PSI |
| PRESS. | DF16202 | – | – | 0 to 140PSI |
| TEMP. | DF16302 | – | – | 100 to 300 F deg |
| E.G.T. | DF16402 | – | – | 400 to 2000 F deg |
| VOLT | DF16502 | – | – | 10 to 15V |
| Tachometer 9000rpm | – | – | DF17202 | 0 to 9000rpm |
| Tachometer 11000rpm | – | – | DF1732 | 0 to 11000rpm |
Specifications
| Power supply voltage | DC10 to 15V (Exclusive for 12V vehicle) |
| Current consumption | 2 1/16″ (52mm) & 2 3/8″ (60mm) series +B line: MAX 120mA (Dark current 0mA) IGN line: MAX 120mA ILM line: MAX 2mA3 1/8″ (80mm) +B line: MAX 400mA (Dark current 0mA) IGN line: MAX 400mA ILM line: MAX 2mA |
| Dial color | Black (invisible until the ignition is turned on) |
| Illumination color | SI models: white USDM models: redPointer: White *The color cannot be switched. |
| Size | Please refer to the manual. |
| Applicable Number of Cylinders | 1, 2, 3, 4, 5, 6, 8 (only for tachometer) |
| NOTE | *This product is for only on vehicles with a 12V electrical system. Never use this product on 24V vehicles. *Products can not be installed in altered vehicles. *Proper sensor attachments are necessary. |
Racer Gauge connection
Wiring diagram
- *Sensors, and sensor wires are common in those for ADVANCE System.
- *Control Unit is unnecessary to operate Racer Gauges. Racer Gauges cannot be linked to ADVANCE System or Defi-Link system.
