Are the AEM Dash Displays the best on the market?
The AEM Carbon Dash Displays exist on the market for more than 3 years. We are still trying to find another display with all these functions. So, why to choose this display?
Let’s put on bullets the reasons some have to buy this display.
- Available in 2 display sizes. 5 or 7 inch is enough to monitor and display all critical data without losing any data.
- Screen with 800×480 resolution.
- Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) — no other can do this…
- Use it everywhere… IP65 water resistance – open cockpit, marine and motorcycle safe.
- Reads data from two separate user programmable CAN bus connections.
- There are Plug & Play Adapter Cables for Holley, Link, MSD Atomic and Vi-Pec ECUs among the others.
- Reads OBDII CAN bus data.
- Available with or without 200Mb internal logging memory.
- Logging refresh rate up to 1,000Hz per channel!
- Available with or without on-board 20Hz GPS receiver and antenna.
- Add a Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing.
- Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages.
- Dedicated Alarm page quickly identifies problems.
- Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
- Free DashDesign Graphics Editor software.
- Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
- Two programmable LEDs.
- Odometer function.
- Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own.
- ‘Headlight-in’ connection dims the dash and LEDs during night operation.
- Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.).
- User supplied graphics can be changed based on channel values (up to the full screen size).
- Convert CAN bus channel values to user-defined text in multiple languages.
In case you haven’t got is yet, you can use this display almost on every modern aftermarket ECU that exists on the market now. A small list of these ECUs is the following
- Adaptronic M1200, M2000, M6000 ECUs
- Adaptronic Modular series Plug-in ECUs
- Autosport Labs, AnalogX 4 Channel Analog to CAN Module
- BigStuff GEN4 Pro Xtreme ECUs
- Bosch IMU 2-Axis Accel & Yaw Sensor
- Can-Am Maverick X3 (2017-19) Can Am Maverick X3
- Edelbrock Pro-Flo 4 Electronic Fuel Injection
- EFI Technology S.r.l. Euro-4 ECU
- EMS EM-Tech EM70, EM80, EM140, EM160 & EM180 ECUs
- FAST XFI 2.0 ECU
- gaugeART 31-001, 8 Ch Analog Expansion Module
- GM/Delphi MEFI-4b ECUs
- Haltech Elite 550, 750, 950, 1000, 1500, 2000, 2500, 2500T ECUs
- Haltech Elite VMS, VMS-T
- Haltech Platinum Pro, Platinum Sport and Platinum Sprint ECUs
- Haltech WBC1 & WBC2, 1 & 2 Ch CAN widebands
- Holley HP EFI, Dominator EFI ECUs Holley ECUs
- Holley Sniper & Super Sniper EFI Kits Holley ECUs
- Hondata KPro4 and S300 V3 ECUs
- KMS MD35 ECU
- KMS Single Ch CAN wideband
- KMS 4 Ch EGT Module
- KMS 4 Ch Wheelspeed Module
- KMS 2 Ch DBW Module
- KMS Flex Fuel CAN Module
- Life Racing F42, F88, F90 & GDI Series ECUs
- Link G4+ based ECUs CD-7 to LinkG4+ ECUs
- Link CAN-Lambda Module
- Megasquirt, MS3, MS2, Microsquirt, DIYPNP & MSPNP Gen2 ECUs
- MicroTech LT-9C, LT-10C, LT-15C & LT-16C ECUs
- Motec M1, M84, M400, M600, M800, & M880 ECUs
- Motec PDM15, PDM16, PDM30 & PDM32 Power Distribution Modules
- Motec PLM Lambda Module
- Motec LTC, LTCD Lambda to CAN Modules
- Motec E888, E816, CAN Expansion Modules
- MSD AtomicEFI Throttle Body ECUs CD-7 to MSD Atomic TBI
- MSD GRID Programmable Ignition
- PCS EGT-2000, 8 Ch EGT Module
- Performance Electronics PE3 Series ECUs
- Polaris RZR XP-900, RZR XP-1000, & RZR XP-Turbo Polaris RZR
- ProEFI Pro128, Pro112, and Pro48 ECUs
- RaceGrade TC8, 8 Ch EGT Module
- RaceGrade 8 Ch and 15 Ch Keypads
- Racepak V300SD, V500SD, Sportsman, G2X, & G2XPro Loggers
- Racepak 220-VM-USM, Universal 4 Sensor Analog Modules
- Racepak 220-VP-IRXXXX, IR Tire & Brake Temp Modules
- Racepak 220-VP-JBXXXX, Exhaust Temp Modules
- Racepak 220-VP-PTXXXX, Pressure Sensor Modules
- Racepak 220-VP-PTXXXX, Wheelie Bar Force Modules
- Racepak 220-VP-RIDEHTXX, Laser Ride Height Modules
- Racepak 220-VP-TCXXXX, Thermocouple Modules
- Racepak 220-VP-TRXXXX, Coolant/Air/Oil/Trans/Diff Temp Modules
- Syvecs S6, S6+, S6I, S8, SDI & S12 ECU’s
- Techmor AC-1-4, 4 Ch Analog Expansion Module
- Techmor IR-1 Non-Contact IR Tire Temperature Module
- Techmor AP-1, 16 Ch Aero Pressure Sensor Module
- Techmor SG-1-C, Strain Gauge Amplifier Module
- Vi-PEC i44-i88 ECUs CD-7 to Vi-Pec i44/i88 ECUs
- Zeitronics Zt-3 CAN AFR Meter and Datalogging System
- Yamaha YXZ (2016-Up) Yamaha YXZ
- Zeitronics ECA CAN Ethanol Content Meter
Find me a competitor.