Category: Performance

AEM V3 Water/Methanol Standard Controller Kit Internal MAP with 35psi max

AEM V3 Water/Methanol Standard Controller Kit Internal MAP with 35psi max

AEM’s Water/Methanol Injection wiring harness for the Boost Dependent 35 PSI controller is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive. More

AEM High-Flow Low-Current WMI Solenoid

AEM High-Flow Low-Current WMI Solenoid

AEM’s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. More

AEM V3 Water/Methanol Nozzle and Controller Kit, Standard Controller Internal MAP

AEM V3 Water/Methanol Nozzle and Controller Kit, Standard Controller Internal MAP

AEM’s Boost Dependent Water/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive. More

AEM V3 Water/Methanol Injection Kit, Standard Controller Internal MAP

AEM V3 Water/Methanol Injection Kit, Standard Controller Internal MAP

Water/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high performance naturally aspirated race engines.

This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system. More

AEM V3 Water/Methanol Nozzle and Controller Kit (No tank)

AEM V3 Water/Methanol Nozzle and Controller Kit (No tank)

AEM’s Water/Methanol Injection System wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation.

Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive. More

AEM V3 Water/Methanol Injection Kit, Multi Input Controller 0-5v

AEM V3 Water/Methanol Injection Kit, Multi Input Controller 0-5v

The on-demand progressive Multi-Input controller in AEM’s PN 30-3350 Water/Methanol Injection kit for gasoline vehicles features a multiple input design that enables users to install AEM’s Water/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor.

The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF. More

Innovate MTX-D - Digital, Oil Temperature and Pressure Gauge Kit - Product items

Innovate MTX-D: Digital, Oil Temperature and Pressure Gauge Kit

The new Innovate Motorsports MTX Digital Series “Dual Function” Oil Pressure and Temperature Gauge is now available! That’s right! One gauge, TWO functions! In addition, the 2 1/16” (52mm) gauge features a water resistant casing, interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections used to connect with other Innovate devices for logging to your PC, iPhone, iPod Touch, iPad, LM-2, DL-32. More

AEM Analog Wideband Air-Fuel Gauge- Item view

AEM Analog Wideband Air/Fuel Gauge

AEM’s legendary Wideband O2 Air/Fuel UEGO Gauge unites unsurpassed accuracy, speed and control with an easy to read, analog interface. The unit’s 52mm (2-1/16″) gauge housing fits in most gauge pods and can be remotely mounted virtually anywhere. The gauge also features a 0-5v analog output for use with data loggers and virtually any engine management system, such as the AEM EMS or FIC. More

Load More