Racedom Peugeot Rallye Citroen VTS Ignition Kit
The Peugeot 106 Rallye kit refers to all Peugeot models including 106 Ralley that have two double ignition coils. This kit will remove the existing ignition cassette. A brand new and powerful MSD ignition coil will be used in place with spark plug wires. We provide you also the connector that you need for the new coil.
Ford DIS 4 Tower Coil Pack. For 1995-1998 4.6L DOHC/SOHC. MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. The coil pack has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.
3 way Ford coil pack connector complete with terminals
MSD offers a universal set of 8.5mm Super Conductor plug wires for the Midget racers. These 50 ohms per foot resistance wires are supplied with the coil side’s special locking terminal and boot crimped to the wires. The spark plug side boots and terminals are supplied loose so the wires can be routed and crimped for each application. A special mini-stripper-crimper tool is also supplied.
The Citroen Saxo kit, Peugeot 106 Ralley kit refers to all Peugeot models including 106 Rallye, VTS that have two double ignition coils. This kit will remove the existing ignition cassette. A brand new and powerful MSD ignition coil will be used in place with spark plug wires. We provide you also the connector that you need for the new coil. The ignition upgrade kit is mandatory for vehicles that the existing ignition system is old, does not attribute the awaited performance or in case the engine has been restored or has been turbocharged, and needs more power to the spark.
Installation Steps
- Remove the old ignition coil system
- Take the four wires that come up to the coil connector and merge the two wires that have 12 Volts constantly
- Choose the place that you will install the coil and install it.
- Connect the coil connector to the old wiring. (the merged wires on the center the other wires on the ends of the connector
- Plug in the spark plug wires to the coil the cut them to the appropriate length for each cylinder
- Install the spark plug boots
Note:Some of these steps have to be done by an expert.
Kit Contents
- 1 X High Power Ignition Coil
- 4 X Spark plug wires
- 4 X Spark plug boots
- 1 X Coil connector
